Berger 1 Ltr White Enamel
Product composition: Berger Luxol Hi-Gloss enamel is manufactured with suitable alkyd, finest pigments and few important additives. It gives a mirror-like gloss with tough film and ever lasting finish. It can be used both for exterior and interior surfaces. It is a solvent-based liquid paint and can be applied on all surfaces, mainly on mild steel, wooden and suitably prepared masonry surfaces.
USP: Mirror-like gloss, tough film, can withstand any Indian weather conditions. Direction for use:
Surface preparation: Initially sand the surface with coarse sand/water paper according to the type of surfaces to remove rust, dust and other loose/unwanted particles. Wipe the surface clean. Apply one coat primer after proper thinning and allow the paint to dry fully. Sand the surface again with less coarser sand/water paper lightly and wipe clean. Apply 2 coats appropriate primer giving overnight interval between the coats. Sand it again with Water Paper No. 220/280. For wooden and metal surfaces apply 1 coat of Luxol Speed Coat Primer Surfacer with proper dilution and for wall surfaces apply 1 coat of solvent-base cement primer with ideal dilution. Allow it to dry fully. Sand the painted surface with Water Paper No. 80/400 lightly to make the surface smooth/undulation free. Before application of top coat, dilute the paint as mentioned above and strain it through clean cloth. Ensure the painting brush and mixing container are absolutely clean. Apply Luxol HG 2 to 3 coats to get rich, smooth, and high-gloss finish giving overnight interval between the coats.
Technical data:- Recommended Thinner: Thinner 800. Painting Tools Required: Brush, felt roller and spray. Recommended Dilution: 10-15% (v/v). Shelf Life: 3 to 4 years from the date of manufacturing so long the container is sealed and kept in normal temperature (not in direct sunlight or high temperature). Drying Time: SD: 3-4hrs HD: Overnight, depending on ambient conditions. Gloss Level: 80+/-5° at 60° GH on tin plate when released. Flash Point: Not below 37°C. Usable Time of Diluted Material: Use within 24 hrs. Brushing Viscosity: 40 - 45 sec at 30°C. Spraying Viscosity: 20- 30 sec at 30°C. Roller Viscosity: 60 - 65 sec at 30°C.
Points To Note:- Shake well before use and do not over dilute. Strain the material through a fine sieve before use. Keep the container tightly closed to prevent drying. Please keep out of reach of children and away from foodstuff. In case of contact with eyes, wash immediately with water and seek medical advice. Use 1 or 2 coats of Bio-Wash for killing fungal growth. For deeper shade apply 1 additional coat. Special Note:-
Before painting the following things should be checked thoroughly:
1. Moisture content of the wall (Ideal condition-below 12%). 2. pH value of the wall surface (Ideal condition-between 7-11).Buy Berger 1 Ltr White Enamel online in India at wholesale rates. If you have been looking for Berger 1 Ltr White Enamel dealers, your search ends here as you can get the best Berger 1 Ltr White Enamel distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Berger 1 Ltr White Enamel of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Berger 1 Ltr White Enamel prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Berger 1 Ltr White Enamel rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Berger 1 Ltr White Enamel today and avail the best offers on your purchase.
